Zotac ZBOX Instruction Manual page 15

1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
3. Connecting to a network
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network router, hub or switch.
4. Connecting to USB 2.0 devices
Connect USB 2.0 devices such as keyboards, mice, cameras and hard disk drives.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard disk drives, SSDs and flash drives to the USB
3.0 port on the system rear panel.
7. Connecting the power adapter and turning on the ZBOX
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
 When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the
AC outlet to conserve power.
ZOTAC ZBOX
15