Assembling Cleaner; Carton Contents - Hoover TurboPower WindTunnel Series User Manual

1. Assembling cleaner

This cleaner was inspected and packaged carefully before being shipped
from the factory. If you should happen to need assistance during assembly
or operation, call
1-800-944-9200 for an automated referral of service outlet locations
(U.S. only)
1-330-499-9499 to speak with a representative in our Consumer
Response Center
Visit us on-line at www.hoover.com to find the service
outlet nearest you (click on the "Service" button).

Carton Contents

1-1
B
A
Remove all parts from carton and
identify each item shown. Make sure
all parts are located before disposing
of packing.
A. or B. Handle section
C. Cleaner body
D. Hose, cleaning tools and wands
E. Crevice wand (included with some
models instead of crevice tool)
F. Handle bolts and nuts packet
(in bag with owner's manual)
STEP I Attach handle
1-2
A
Remove bag door on cleaner body
by pushing down at top of door and
pulling door outward.
Switch (A) above bag door should
be in OFF position.
OR
OR
D
C
1-3
Slide handle onto cleaner body.
F
H
E
G
Not required for assembly:
G. Extra filter bag (one already
installed in cleaner)
H. Extra belt (one already installed
in cleaner)
1-4
Push bolts into holes on back of
handle.
Continued
3