Table of Contents
Advertisement
Using a hard disk drive (PC mode: USB host)
Switching to the USB HOST mode
Select USB HOST in PC MODE SELECT on
the setting menu SYSTEM SETUP screen,
and press SET on the Operation lever.
Press MENU twice to exit the menus.
Turn the POWER/MODE switch to the MODE
position to illuminate the PB/THUMBNAIL
lamp, and then turn and hold it.
In USB HOST mode, clips on P2 cards can
be displayed but video from the camera-
recorder cannot be recorded.
You cannot return to standard mode from
USB HOST mode. Turn the power off and
then turn it back on again.
Advertisement
Table of Contents
