Specifying Mail Basic Items - Canon imageCLASS 2300 Sending Manual

Specifying Mail Basic Items

This section describes procedures for specifying I-Fax transmitting and receiving
conditions.
You can specify the following items in MAIL USER SETTINGS:
3
01 SMTP SERVER
02 POP3 SERVER
03 EMAIL RX PROTOCOL Specify a reception protocol.
04 CHECK INTERVAL
05 RETRY
06 RETRY INTERVAL
07 TIME ZONE SETTING
08 PORT NO.
09 MAX. RX DATA SIZE
10 TX MODE
11 RX TEXT PRINT
12 LARGE MAIL
13 ERROR MAIL
3-2

Specifying Mail Basic Items

Item
Register a SMTP server address.
Register a POP3 server address.
Specifying a checking interval (in
minutes) of POP3 mail.
Specifying the number of retries to
reconnect to the network after
failure.
Specifying a retry interval (in
minutes) to reconnect to the
network after failure.
Specifying the time zone for the
machine.
Specifying a connection port
number of each item.
Specifying the maximum reception
data size.
Specifying the I-Fax transmission
mode.
Specifying if message text is to be
printed when received mail has a
text message.
Specifying whether mail is to be
left on a server when it is larger
than the size specified in the
<MAX. RX DATA SIZE> screen.
Specifying if error mail is to be left
on the server.
Description Setting
'POP3*', 'SMTP'
0-60
0*
0-5
2*
1-60
2*
00001-65535
25* (SMTP)
110* (POP3)
0-9999
1000*
'SIMPLE MODE*',
'E-MAIL MODE'
'ON',
'AUTO*',
'OFF'
'LEAVE ON SERVER*',
'ERASE FROM
SERVER'
'LEAVE ON SERVER*',
'ERASE FROM
SERVER'