Connecting A Cable Box - Sony KP-53XBR300 Operating Instructions Manual

Connecting a Cable Box

Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to view
all channels.
Also, set CABLE to ON in the CHANNEL SET
UP menu. (see page 37)
(Rear of Projection TV)
Cable
IN OUT
*cable box
Note:
• If you will be controlling all channel selection
through your cable box, you should consider using
the CHANNEL FIX feature. (see "CHANNEL
FIX" on page 37)
C C C C ab abl l l l e bo ab ab e bo e bo e box x x x and cab and cab and cabl l l l e e e e and cab
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
*cable box
(Rear of Projection TV)
CATV cable
(unscrambled channels)
6
For this set up, you can switch between scrambled
channels (through your cable box), and normal
(CATV) channels by pressing ANT on your remote
control.
Notes:
• You may be able to program your Sony remote
control to operate your cable box. (see "Operating a
Cable Box or DBS Receiver" on page 54)
VHF/UHF
• During PIP, P&P, CHANNEL INDEX or
FAVORITE CHANNEL viewing, the AUX input
can only be viewed in the main picture.
• If you are connecting a cable box through the AUX
input and would like to switch between the AUX
and normal (CATV) input, you should consider
using CHANNEL FIX. (see "CHANNEL FIX" on
page 37)
AUX
VHF/UHF