Troubleshooting Guide - Honeywell CL48PM Owner's Manual

PROBLEM
No discharge of air
Not Cooling / Unit is
making noise
Odors
Customer Support: +46 (0)31 761 36 10

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
Cord is not plugged in.
Power is not on.
Pump is not turned ON.
Low or no water in tank,
when COOL is selected.
Damaged Pump or
Calcium deposits on blower.
When the Cooler is new.
If the Cooler has been used.
SOLUTION
Make sure power cord is plugged
in and the supply switch is on.
Turn the unit ON by pressing
button on the control panel.
On Control Panel, turn COOL
FUNCTION to "ON".
Refill water tank.
Contact service center.
When the unit is used for the
first time, the Honeycomb
Cooling Media will have an
odor, which will
within a few hours of initial
use.
There may be an algae issue.
Replace the Honeycomb
Cooling Media.
dissipate
15