Makita DTM41 Instruction Manual
Cordless multi tool
Hide thumbs
Also See for DTM41:
- Instruction manual (76 pages) ,
- Technical information (12 pages) ,
- Instruction manual (64 pages)
Related Manuals for Makita DTM41
Summary of Contents for Makita DTM41
- Page 1 INSTRUCTION MANUAL Cordless Multi Tool DTM41 DTM51 014551 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DTM41 DTM51 Oscillation per minute 6,000 - 20,000 (min 1.6 ﾟ (3.2 ﾟ total) Oscillation angle, left/right BL1830 / BL1430 / BL1440 / BL1415* / BL1815* / BL1815N* / Standard battery cartridge BL1840 / BL1840B /... - Page 3 Do not expose power tools to rain or wet 18. Do not use the power tool if the switch does conditions. Water entering a power tool will not turn it on and off. Any power tool that increase the risk of electric shock. cannot be controlled with the switch is dangerous Do not abuse the cord.
- Page 4 29. Follow instruction lubricating 18. Be sure that there are no cracks or breakage changing accessories. on the pad before use. Cracks or breakage 30. Keep handles dry, clean and free from oil and may cause a personal injury. grease. 19.
-
Page 5: Functional Description
ENC007-9 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS WARNING: Always be sure that the tool is switched off • FOR BATTERY CARTRIDGE and battery cartridge is removed before Before using battery cartridge, read all adjusting or checking function on the tool. instructions and cautionary markings on (1) Failure to switch off and remove the battery battery charger, (2) battery, and (3) product cartridge may result in serious personal injury from... - Page 6 Battery protection system Indicator lamps (Lithium-ion battery with star marking) Remaining capacity 1. Star marking Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% 012128 Lithium-ion batteries with a star marking are equipped Charge the battery.
-
Page 7: Indication Lamp
The orbital stroke rate is adjustable. To change the Do not start the tool while the lever opens. The • orbital stroke rate, turn the dial between 1 and 6. The tool may be damaged. higher the number is, the higher the orbital stroke rate is. Open the lock lever fully. -
Page 8: Operation
Sanding 1. Adapter CAUTION: Do not reuse a sanding paper used for sanding • metal to sand wood. Do not use a worn sanding paper or sanding • paper without grit. 014554 When using application tools with a different type of installation section, use a correct adapter (optional accessory). -
Page 9: Maintenance
1. Nozzle band attachment for its stated purpose. 2. Dust nozzle If you need any assistance for more details regarding 3. Dust attachment these accessories, ask your local Makita Service Center. 4. Felt ring Segment saw blade • 5. Pad Round saw blade •... - Page 12 Makita Corporation www.makita.com 885329B3...