Table of Contents
Advertisement
setup screen
7. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
Refer to "FTP / E-mail" for more details. (page 89)
• E-mail : Specify the use of email transfer in the alarm input setup.
Refer to "FTP / E-mail" for more details. (page 89)
• Record : You can set up the alarm to record to a Micro SD card or an NAS when
operating.
Set <Device> to <On> in <Storage>. (page 91)
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
• Goto preset : Moves to the specified preset location when setting the alarm input.
Only if the camera pan/tilt receiver is installed, Goto preset is available.
8. When done, click [Apply (
100_ setup screen
)].
Advertisement
Table of Contents
