4-6.
Note on Mounting FG-43 Board
1) Align two bosses. (See Fig.11)
2) Fix the board securely with screws (PTPWH 2 × 5). (The sensor
will not function normally if the board floats up.)
Screw
(PTPWH2 × 5)
FG-43 board
Fig. 11
4-7.
Note on Mounting TK-47 Board
1) Align two bosses. (See Fig.12)
2) Align four tabs. (See Fig.12)
3) Fix the board securely with 3 screws (BV 3 × 10). (The sensor
will not function normally if the board floats up.)
TK-47 board
Two claws
Boss
Fig.12
Two bosses
Three screws
(BV3 × 10 )
Boss
Two claws
— 8 —