Checking Tcp/Ip Settings - D-Link DI-304 User Manual

DI-304/DI-304M ISDN Remote Router
5. Make the New gateway and Installed gateways fields blank and click OK. A
dialog box will pop up asking you to restart the PC. Click Yes.

Checking TCP/IP Settings

1. After completing the previous steps, click Start → Run. Click the Gateway tab
and type winipcfg. The IP Configuration window will open. If the PC does not
show an IP address in the 192.168.0.2 to 192.168.0.254 range, click the Release
button to release the current configuration. Wait a few seconds and click Renew to
get a new IP configuration from the router.
15