Powering On - Vivitar VT426 User Manual

3) Insert the Micro SD Card into the slot in the direction shown on the camera (see SD icon by
the Micro SD card slot). Push the Micro SD Card until you hear a slight clicking sound. This
indicates the memory card has been inserted correctly.
NOTE:
 There is only one right direction to insert the Micro SD memory card into the slot. Do not force
the card into the memory card slot, since it may damage both the camera and the Micro SD
memory card.
 After the camera is powered on, a memory card icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.
IMPORTANT:
The Micro SD memory card must be formatted before taking photographs.
Formatting the Micro SD Memory Card:
1) Press the MENU button in Photo Capture or Video Capture mode.
Select the 'Setup Menu'
2)
Press the  DOWN (W) button to highlight and select the 'Format' and press the
3)
SHUTTER/OK button to confirm.
'SD Card' is automatically highlighted. Press the SHUTTER/OK button to select and
4)
continue.
5) The following options appear:
Cancel, OK
 To format the Micro SD Memory Card, select 'OK' and press the SHUTTER/OK button.
All data on the memory card will be deleted.
 To exit the menu without formatting the SD Memory Card select 'Cancel' then press the
SHUTTER/OK button. Alternatively, you can press the MENU button to exit.

POWERING ON

Press the POWER button to turn on the camera.
options by pressing the  RIGHT (Playback) button.
8