Switching Sources; Operating The Function Button On The Audio/Video Main Screen - Alpine X901D Owner's Manual

Switching Sources

Press the (AUDIO) button to change the source.
Switching sources using the
During audio/visual playback, press the
repeatedly to switch to the desired source.
1
Radio DAB USB/iPod*
1
Bluetooth Audio* Radio
*1 When no USB flash drive/iPod/HDMI device/Smartphone/Bluetooth
compatible device is connected, this option is not available.
*2 The name set for "HDMI Setup (page 43)/AUX Setup" is displayed.
*3 When AUX is set to "Off, " this option is not available. (page 43)
Switching Sources from the Menu screen
1
Press the MENU button.
The menu screen is displayed.
• You can also display the menu screen by touching [
on the lower part of the Audio source screen or by swiping upward.
The Audio source selecting area
2
Touch your desired source in the Audio source selecting
area.
• In the menu screen, you can change the Audio source directly or change
the order in which sources change. For details, see "About the Menu
Screen" (page 19).
16
-EN
(AUDIO) button
(AUDIO) button
1, 2 2, 3
HDMI* AUX*
Operating the Function Button on the Audio/
Video Main Screen
Using the Function button on the Audio/Visual main screen.
Touch [ ] to change to the Function mode.
Radio main screen example
]
Function mode
Swipe to the right or left to change to the Function mode.
To close the Function mode, touch [
• Depending on the Audio source, the Function mode displays from the
beginning.
].