9
Setting stitch counting function for bobbin thread monitoring
.07
9
Direct input of number of stitches on the control panel
.07.01
● Switch on the machine.
● Press the F5 key and then the F1 key.
F 5
F 1
● By pressing +/- on the key A or B set the number of stitches to be sewn with one bobbin
(max. 10000 stitches).
07000s
+
-
A
● Terminate input by deactivating the F5 key (LED off).
F 5
9
Entering the number of stitches using the teaching function
.07.02
● Insert a full bobbin and switch on the machine.
● Press the F5 key and then the F1 key.
F 5
F 1
● Press Parameter input (LED on).
● Sew until the bobbin is empty.
● Carry out the thread trimming function.
● Press the F5 key and Parameter input (LED off).
F 5
The teaching function is completed. On the next bobbin the control unit automatically
subtracts 10 stitches from the taught number of stitches
01/00
+
+
+
-
-
-
B
C
D
Setting up
9 - 7