Trim Installation - Monessen Hearth BWB400 Series Installation, Operation And Maintenance Manual

G A
AS PPLIANCE
F 28
IGURE
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
OUTER FIREPLACE WRAP
INNER FIREPLACE WRAP
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
SIDE BRICK
COMBUSTIBLE FRAMING
MEMBERS FACING MATERIAL
COMBUSTIBLE FRAMING
TO TOP OF SPACERS.
MEMBERS FACING MATERIAL
FIREPLACE FIREBOX
TO TOP OF SPACERS.
HEARTH BRICK
GAS LINE ACCESS TUBE
CAUTION: WHEN USING A GAS
APPLIANCE, THE FIREPLACE
DAMPER MUST BE SET IN FULLY
OPEN POSITION.
F 29 30
IGURES AND SHOW ACCEPTABLE COMBUSTIBE MANTEL LOCATIONS IF AN UNVENTED GAS APPLIANCE IS INSTALLED IN THE
. S P C
FIREPLACE EE ART
.
WOOD
COMBUSTIBLE
FRAMING
COMBUSTIBLE
MEMBERS
FRAMING
MAY BE
MEMBERS
PLACED
MAY BE
ACROSS
PLACED
TOP SPACERS.
ACROSS
TOP SPACERS.
2 3/4" HOOD
(PART NO.
2 3/4" HOOD
075629)
(PART NO.
075629)
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
T I
RIM NSTALLATION
COMBUSTIBLE SURROUND
MATERIALS MAY BE PLACED
Do not allow the trim materials to extend closer than 3/8 inch to the vertical edges of the firebox opening if you
WITHIN SHADED AREAS. COMBUSTIBLE SURROUND
NOTE: COMBUSTIBLE MATERIALS MAY BE PLACED
plan to equip the fireplace with glass doors.
MATERIALS MUST NOT WITHIN SHADED AREAS.
OVERLAP BLACK PAINTED NOTE: COMBUSTIBLE
SURFACE MORE THAN 1/8".) MATERIALS MUST NOT
The face of your fireplace may be left exposed or trimmed. If trim is installed, be sure it is fastened securely to
OVERLAP BLACK PAINTED
SURFACE MORE THAN 1/8".)
the face of the fireplace. Any crack between the trim material and the face of the fireplace could pose a fire
hazard and impair the proper operation of the fireplace; seal such cracks. See Figure 31. Blocking the fireplace
with framing and attaching the base to the supporting floor will reduce the possibility of a crack redeveloping
after sealing. (CAUTION: ACCEPTABLE COMBUSTIBLE MANTEL LOCATION SHOWN BY PART C OF
FIGURE 31 IS FOR WOODBURNING FIREPLACE INSTALLATION ONLY. SEE FIGURES 29 AND 30 FOR
ACCEPTABLE COMBUSTIBLE MANTEL LOCATIONS WHEN AN UNVENTED GAS APPLIANCE IS
INSTALLED IN THE FIREPLACE.)
26
53D9031. Rev 1 03/03
I
NSTALLATION
NON-COMBUSTIBLE
FACING MATERIAL
NON-COMBUSTIBLE
FACING MATERIAL
26" MAX.
FIREPLACE FACE
STEEL LINTEL
(OPTIONAL)
F 31
OF IGURE FOR ACCEPTABLE COMBUSTIBLE MANTEL LOCATION IF FIREPLACE IS INSTALLED TO BURN
F 29
IGURE
12" MAX.
12" MAX.
12"
NOTE: NO COMBUSTIBLE
12"
MATERIAL BELOW 12"
NOTE: NO COMBUSTIBLE
FROM OPENING
MATERIAL BELOW 12"
39 1/2"
FROM OPENING
075629 HOOD MUST
BE INSTALLED WHEN 39 1/2"
075629 HOOD MUST
MANTEL IS 12" FROM
BE INSTALLED WHEN
FIREPLACE OPENING.
MANTEL IS 12" FROM
WHEN 075629 HOOD IS
FIREPLACE OPENING.
INSTALLED GLASS DOORS
WHEN 075629 HOOD IS
HAVE TO BE REMOVED.
INSTALLED GLASS DOORS
HAVE TO BE REMOVED.
OUTLINE OF
FIREPLACE
FIREBRICK
OUTLINE OF
FIREPLACE
FIREBRICK
4"
SCREENED OPENING
(REF.)
GAS LINE PLUMBING DETAIL
USE ONLY NON-COMBUSTIBLE
MATERIALS BELOW TOP OF SPACERS.
MAINTAIN 1/2" MINIMUM
USE ONLY NON-COMBUSTIBLE
AIR SPACE CLEARENCE
MATERIALS BELOW TOP OF SPACERS.
TO COMBUSTIBLES FOR
GAS LINE OUT TO 4" FROM
SIDE OF THE FIREPLACE.
COMBUSTIBLE MATERIALS
FIREPLACE FACE
MAY BE LOCATED AT ZERO
CLEARANCE TO GAS LINE
BEYOND 4" FROM FIREPLACE
STEEL LINTEL
SIDE.
(OPTIONAL)
CAUTION:
REPACK INSULATION AROUND
DO NOT COVER
GAS LINE WHERE IT PASSES THRU GAS
CAUTION:
OR RESTRICT SIDE VENT
LINE ACCESS TUBE FOR
DO NOT COVER
AREAS WITH SURROUND
PROPER SEAL.
OR RESTRICT SIDE VENT
OR TRIM MATERIALS.
AREAS WITH SURROUND
OR TRIM MATERIALS.
COMBUSTIBLE
MANTEL AND/OR
F TRIM MAY BE 30
IGURE
PLACED WITHIN
THE SHADED AREA.
NON-COMBUSTIBLE
WALLBOARD
TOP "V"
SPACERS
TOP "V" TOP "V"
SPACERS SPACERS
FLOOR
FLOOR FLOOR
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE.
1/4"
OF FIREPLACE
4"
SCREENED OPENING
(REF.)
OF FIREPLACE
BACK
REFRACTORY
BRICK
WARNING:
THE SPACE BETWEEN THE
WARNING:
KNOCKOUT
FACE OF THE FIREPLACE
THE SPACE BETWEEN THE
AND THE NON-COMBUSTIBLE
FACE OF THE FIREPLACE
FACING MATERIAL MUST BE
AND THE NON-COMBUSTIBLE
SEALED. FAILURE TO
FACING MATERIAL MUST BE
PROPERLY SEAL THIS CRACK
SEALED. FAILURE TO
CAN CAUSE A POSSIBLE FIRE
PROPERLY SEAL THIS CRACK
HAZARD AND WILL VOID THE
CAN CAUSE A POSSIBLE FIRE
WARRANTY.
HAZARD AND WILL VOID THE
WARRANTY.
COMBUSTIBLE COMBUSTIBLE
MANTEL AND/OR MANTEL AND/OR
TRIM MAY BE TRIM MAY BE
PLACED WITHIN PLACED WITHIN
THE SHADED AREA. THE SHADED AREA.
1 1/2"
NON-COMBUSTIBLE NON-COMBUSTIBLE
MAX.
WALLBOARD WALLBOARD
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE. TOP OF SPACERS AND BEHIND FRONT FACE.
FRAMING
EXTEND LINE FROM OPPOSITE REAR OF
FRAMING
FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF EXTEND LINE FROM OPPOSITE REAR OF
SCREENED OPENING. FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF
FINISH WALL
SCREENED OPENING.
1/4"
FINISH WALL
SIDE
REFRACTORY
BRICK
8"
8"
1 1/2" 1 1/2"
MAX. MAX.
48"
(MIN.)
48" 48"
44"
(MIN.) (MIN.)
(MIN.)
44" 44"
(MIN.) (MIN.)