Table of Contents
Advertisement
O
perations
special features
Removable water tank
The water tank is located on the back of
the Steam&Sweep. It can be refilled with
water any time during use. Distilled or
demineralized water is recommended in
place of tap water.
do not use chemicals with your
steam&sweep.
Water purification system
This filter removes minerals and other
impurities from tap water, preventing
water deposits from damaging your
Steam&Sweep. It should be replaced
when the bright green grains turn blue.
To maximize performance of the filter, dis-
tilled water should be used.
Ready light
The ready light will glow when water
has been converted to steam and the
Steam&Sweep is ready to use.
steam on demand trigger
Press to release steam.
manoeuvrable swivel head
Allows you to pick up dust and small
debris while steam cleaning your floor.
The manoeuvrable swivel head gets into
tight spaces and under cabinets.
microfibre mop pads
These washable, reusable microfibre pads
feature buit-in Microban® antibacterial
protection to help prevent the growth of
99.9% of harmful bacteria on the pad sur-
face to keep your pad fresher between uses..
getting ready
1. The mop pad may have already come
attached to the swivel head. If not, attach
mop pad to swivel head using the Velcro
strips.
2. fill the water tank.
a. Remove the tank by lifting straight up
and away from the unit.
b. Unscrew the cap at the bottom of
the water tank and remove the insert
assembly.
6
w w w . b i s s e l l . c o m
Tip:
To prevent damage to the machine,
do not attempt to use your
Steam&Sweep without water in
the tank.
2a.
2b.
Advertisement
Table of Contents
