Frequently Asked Questions - MSI RX480M2 MS-7093 User Manual

6. Use the arrow keys to navigate to Integrated Peripherals, and then press
Enter. The Integrated Peripherals screen appears.
7. Use the arrow keys to navigate to Init Display First and set it to PCI-E.
8. Use the arrow keys to navigate to Surroundview and set it to Enabled.
9. Press F10 to Save your changes. When the Save to CMOS and Exit prompt
appears, press Y.

Frequently Asked Questions

Using SURROUNDVIEW™
Question
Does the Windows® "Standby" function work when
SURROUNDVIEW™ is enabled?
Do all ATI cards support SURROUNDVIEW™?
Can SURROUNDVIEW™ run with other manufacturers' graphics
cards?
If the integrated graphics processor (IGP) is enabled and I install
a PCI graphics card, is SURROUNDVIEW™ available?
ATI SURROUNDVIEW
Answer
Yes, Standby should work properly with SURROUNDVIEW™.
No, only the ATI graphics cards noted in System Requirements will
support SURROUNDVIEW™.
No, this function is called "dual adaptor," and functions similarly to using
two, discrete graphics cards. SURROUNDVIEW™ requires an AGP- or
PCIe-based graphics card.
TM
C-7