Sharp LC-13S1M Service Manual page 10

LC-13S1M
LC-15S1M
7. Remove the 3 lock screws from the main PWB and undo the hooks a and b. Lifting the other PWBs close to the
hooks, draw out the main PWB.
8. Remove the 5 lock screws from the sub PWB and undo the hooks c and d. Detach the chassis frame (right),
together with its terminals, from the sub PWB. Undo the hooks e and f in the same way. Detach the chassis frame
(left), together with its terminals, from the sub PWB.
9. Remove the 2 lock screws from the R/C, LED PWB and take out the R/C, LED PWB.
10. Remove the 3 lock screws each from the right and left speakers and take out both the speakers.
8
Chassis Frame (R)
Speaker (R)
c
Sub PWB
d
R/C, LED PWB
10
9
10
7
Main PWB
e
f
Chassis Frame (L)
a
b
LCD panel unit
Speaker (L)
10