Panasonic KX-HDV330 Operating Instructions Manual page 61

*5 Optional headset
For up-to-date information about headsets that have been tested with this unit, refer to the following
web site:
http://www.panasonic.net/pcc/support/sipphone/
R The initial setting for the IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. For details, see "Network Settings", Page 71.
When selecting Ethernet cables (not included)
R Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack
when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
*1 60 mm (2 3/8 in) or less
R Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or
less.
When connecting to a switching hub
R If PoE is available, an AC adaptor is not needed.
R This unit complies with the PoE Class 2 standard.
When connecting a PC
R The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
R Pass the Ethernet cable and the AC adaptor cord under the stand.
*1
Installation and Setup
61