Table of Contents
Advertisement
Janome MyLock213D Instruction Manual
q
w
t
r
y
u
i
q
(A)
1
2
e
3
www.toews.com
e
3
2
(B)
w
a
b
• Threading the Needle
Place the spool of thread on the spool pin second from
the left.
* The points to thread for needle are marked in
orange.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1
1. Draw the thread through the thread guide second
from the left from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
q
Thread guide
2. Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
w
Thread guide plate
3. Insert the thread between tension discs from the
right. Then pull both sides of thread.
e
Needle thread tension dial
* Make sure that the thread is between the tension
discs.
a
thread
b
tension discs
MyLock 213D Owners Manual/ User Guide
Janome 213D Serger
21
Advertisement
Table of Contents
