Table of Contents
Advertisement
Janome MyLock213D Instruction Manual
t
4, 5
6, 7, 8
!0
o
9, 10
www.toews.com
a
b
r
y
u
i
i
4. Insert the thread between tension discs from the
right. Then pull both sides of the thread firmly to
insert it between tension discs.
5. Pass the thread through the lower looper thread
guide (1).
r
Lower looper thread tension dial
t
Lower looper thread guide (1)
* Make sure that the thread is between the tension
discs.
a Thread
b Tension discs
6. Pass the thread through the lower looper thread
guide (2).
7. Pass the thread through the looper thread
take-up lever (lower).
8. Pass the thread through the lower looper thread
guide (3).
y
Lower looper thread guide (2)
u
Looper thread take-up lever (lower)
i
Lower looper thread guide (3)
9. Turn the handwheel toward you to move the
lower looper to the right side.
Then lift up the lower looper thread guide (3).
When you do this, the lower looper thread guide
(4) and (5) are moved to the right for easy
threading.
Pass the thread through the lower looper thread
guide (4).
10. Pass the thread through the lower looper thread
guide (5).
i
Lower looper thread guide (3)
o
Lower looper thread guide (4)
!0
Lower looper thread guide (5)
Holding the end of the thread, push the lower looper
thread guide (3) down with your other hand to return
it to its original position.
Lower looper thread guides (4) and (5) will return to
their original position automatically.
* You can return the lower looper thread guide (3),
(4) and (5) to their original position automatically
by turning the handwheel counterclockwise.
MyLock 213D Owners Manual/ User Guide
Janome 213D Serger
17
Advertisement
Table of Contents
