Table of Contents
Advertisement
Installing plug-in effects in the V Studio
2. Show PLUG-IN BACKUP screen on following steps.
VS-1680
1. Press [SHIFT]+[F6 (UTIL)].
The Utility Menu screen will appear.
2. Press [PAGE] several times until "PIBck"
will be appeared at the F3 (function 3).
The Utility Menu screen page 3 will appear.
3. Press [F3 (PIBck)].
The PLUG-IN BACKUP screen will appear. This lists the VS plug-in programs that are
installed on the hard disk.
4. Use the cursor to select the plug-in that you want to back up, and press [F5 (Bckup)].
The "Backup?" popup will appear.
5. To begin the backing up, press [ENTER/YES].
The "Really, Sure?" popup will appear.
6. To confirm the backing up, press [ENTER/YES].
If you press [ENTER/YES], VS plug-in programs will be backed up to CD-R/RW disc.
The PLUG-IN BACKUP screen will appear.
Re-installing your plug-ins
If you initialize (format) the hard disk of your V Studio, the VS plug-in programs on the
hard disk will be lost, leaving you unable to use the VS plug-in programs even if the VS8F-3
is installed. By re-installing the VS plug-in programs you will again be able to use them.
1. Perform Steps 1~5 of Installation procedure (p. 7).
The "Re-Install?" popup will appear.
2. To begin the re-installation process, press [ENTER/YES].
The "Really, Sure?" popup will appear.
3. To confirm the re-installation process, press [ENTER/YES].
If you press [ENTER/YES], VS plug-in programs will be installed to the hard disk.
4. When installation is completed, remove the CD.
The CD-RW menu screen will appear.
Uninstalling a plug-in
Here's how to delete an installed VS plug-in program. This lets you delete a trial version
of a VS plug-in program, or obtain more free space on your hard disk if it becomes full.
1. Show PLUG-IN INSTALL screen on following steps.
VS-1680
1. Press [SHIFT]+[F6 (UTIL)].
The Utility Menu screen will appear.
2. Press [PAGE] several times until "PIUni"
will be appeared at the F2 (function 2).
The Utility Menu screen page 3 will appear.
2. Press [F2 (PIUni)].
The PLUG-IN UNINSTALL screen will appear. This lists the VS plug-in programs that
are installed on the hard disk.
3. Use the cursor to select the plug-in that you want to delete, and press [F5 (UNINS)].
The "Uninstall?" popup will appear.
4. To start the uninstall process, press [ENTER/YES].
The "Really, Sure?" popup will appear.
5. To confirm the uninstallation process, press [ENTER/YES].
If you press [ENTER/YES], the selected VS plug-in program(s) will be deleted.
8
VS-1880/1824/1824CD
1. Press [CD-RW].
The CD-RW/Mastering Menu screen will
appear.
2. Press [PAGE] several times until "PIBck"
will be appeared at the F3 (function 3).
The CD-RW/Mastering Menu screen page 2
will appear.
VS-1880/1824/1824CD
1. Press [CD-RW].
The CD-RW/Mastering Menu screen will
appear.
2. Press [PAGE] several times until "PIUni"
will be appeared at the F2 (function 2).
The CD-RW/Mastering Menu screen page 2
will appear.
If you lose or damage the
SETUP DISC after
authorization, a fee will be
charged for a correctly
functioning replacement
disc. Be sure to back up
your VS plug-in programs
in order to avoid such an
inconvenience.
It is able to use the
backuped plug-in program
as authorized version if
installed to V Studio with
Key Card.
If you uninstall an
authorized version of a VS
plug-in program, the user
patches will also be
deleted. The deleted data
cannot be recovered.
In Step 3, if you execute
uninstall of the Plug-In
program during the
program is used, a
message "This PLUG-IN is
used at FX *. Continue?"
will appear on screen. (* is
the Effect number.)
Advertisement
Table of Contents
