Advertisement
91-000183-010-000-E560-1 Manual ok.qxd
Battery & charger installation
After installation, place the handset in the charger and allow the bat-
tery to charge for 12 hours before use.You can keep the battery
charged by returning the handset to the charger after each use.
When battery power is fully depleted, a full recharge takes about 10
hours.Average talk time on a fully charged battery is about eight
hours depending on environmental conditions, standby time is
approximately four days.
Press tab to open
battery compart-
ment.
LOW BATTERY
Low battery indicator
Return handset to base or
charger to recharge when
this symbol flashes.
(Handset will beep when
battery is low.)
Insert supplied
battery.
Caution: Use only supplied recharge-
able battery or AT&T replacement bat-
tery model 2420 (SKU 00578. Part
number 80-5542-00-00).
Plug power cord into jack on
underside of charger, then plug
transformer into electrical outlet.
2
2/13/1950
7:21 PM
Then replace
compartment
cover.
Light remains on while
battery is charging.
Page 4
Advertisement
