Shock Linkage Bearing Replacement - Honda CR 125R 2002 Sevice Manual

REAR WHEEL/SUSPENSION
BEARING REPLACEMENT
SHOCK ARM NEEDLE BEARING
Press t he needle bearings (shock link side, swingarm
side) out of the shock arm using special tools and a
hydraulic press.
TOOLS:
SHOCK LINK SIDE AND SWINGARM SIDE :
Driver
Attachment, 24 x 26 mm
Pilot,20 mm
Attachment, 30 mm 1 .0 .
07949 - 3710001
07746 - 0010700
07746 - 0040500
07746 - 0030300
Press the needle bearing (shock absorber side) out
of the shock arm using special IDols and a hydraulic
press.
TOOLS:
Driver
Attachment, 24 )( 26 mm
Pilot. 17 mm
Attachment, 30 mm 1 .0 .
01749 - 0010000
07746 - 0010700
07746 - 0040400
07746 - 0030300
Pack the new needle bearings with multi-purpose
grease.
Press {haMedle Press the new needle bearings into the shock l ink
bearings into the
side pivot so that the needle bearing surface is lower
sflockarmwith
6.5 -7.0
mm
(0.26 - 0.28
in) from the end of the
the marked side
shock arm surface.
lacing out.
Press the Medle
bearings into the
shock arm with
the marked side
facing out.
12-28
TOOLS:
Driver
Attachment, 24
l(
26 mm
Pilot,
20
mm
07749 - 0010000
07746 - 0010700
077 46 - 0040500
Pack the new needle bearing with mult i-purpose
grease.
Press the new needle bearings into the 5wingar m
side pivot 50 that the needle bearing surface is
lower 4.4 - 4.7 mm (0.17 - 0.19 in) from the end of
the shock arm surface.
TOOLS:
Driver
Attachment,
24
l(
26
mm
Pilot,
20
mm
07749 - 0010000
07746 - 0010700
077 46 - 0040500
NEEDLE BEARINGS
~
_~
t
6.5 - 7.0
mm
(0.26 - 0.28 in)
NEEDLE BEARINGS
4.4 - 4.7 mm
(0.17 - 0.19 in)