Reed Valve Removal - Honda CR 125R 2002 Sevice Manual

Align the lug on the carburetor with the groove of
the carburetor insulator.
After
2001: Install the sub-frame (page 2-4).
nghten the insulator and connecting hose band
screws securely.
After installation adjust the following:
- Thronle grip free play (page 3-5)
- Air screw adjustment (page 4-4)
After installation check the following:
- Secondary air leaks around the insulator and
connecting tube
- Fuel leaks around the fuel hose and carburetor
- Route the overflow hose, air vent hose and fuel
hose
REED VALVE
REMOVAL
Remove the carburet or (page 4-9).
Remove the bolts, clutch cable clamp and insulator.
2000-2001 : Remove the reed valve and gasket.
FUEL SYSTEM
4-21