Mazda Demio Owner's Manual page 130

Mazda2_8CL7-EA-12H_Edition1 Page130
Monday, June 18 2012 1:48 PM
Driving Your Mazda
Starting and Driving
qDSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-22).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
qDSC OFF Switch
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
illuminates.
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light turns off.
5-22
Form No.8CL7-EA-12H
Downloaded from www.Manualslib.com manuals search engine
Black plate (130,1)
NOTE
When DSC is on and you attempt to free the
l
vehicle when it is stuck, or drive it out of
freshly fallen snow, the TCS (part of the
DSC system) will activate. Depressing the
accelerator will not increase engine power
and freeing the vehicle may be difficult.
When this happens, turn off the TCS/DSC.
If the TCS/DSC is off when the engine is
l
turned off, it automatically activates when
the ignition is switched ON.
Leaving the TCS/DSC on will provide the
l
best stability.