Menu Settings - Bunker Hill Security 62284 Owner's Manual & Safety Instructions

MENU Settings

1. Press the POWER switch to turn on
the system. Press the MENU button to
scroll through and access menus. (See
Figure C on page 6 for control layout).
2. To adjust picture quality:
a. Select the PICTURE menu
using the MENU button.
b. Use the Up (˄) or Down (˅) buttons to
select BRIGHT, CONTRAST, or COLOR.
c. Use the Left (<) or Right (>) buttons
to adjust to the desired settings.
3. To adjust volume:
a. Select the VOLUME menu
using the MENU button.
b. Use the Left (<) or Right (>) buttons to
adjust volume to the desired level.
4. To adjust time interval in AUTO switch mode:
a. Select the OPTION menu
using the MENU button.
b. Select the desired setting by using
the Left (<) or Right (>) buttons to
adjust the time interval from 5 to 99
seconds for automatic switching from
one camera view to the other.
Item 62284
For technical questions, please call 1-888-866-5797.
5. To select system video standard:
a. Select the SYSTEM menu
using the MENU button.
b. Use the Left (<) or Right (>) buttons to
select AUTO, PAL, NTSC, or SECAM.
6. To apply preset timer options:
a. Select the PRESET menu
using the MENU button.
b. Use the Up (˄) or Down (˅) buttons to select
SLEEP, TIME, OFF-TIME, or ON-TIME.
c. Use the Left (<) or Right (>) buttons
to adjust to the desired settings.
Note: If power to the Monitor is cut off or the
system is shut off any settings previously
entered in the PRESET menu will be lost and
the information will need to be re-entered.
Page 9