Service Safety - Bunker Hill Security 62284 Owner's Manual & Safety Instructions

5. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate
(DEHP), chemicals known to the State
of California to cause cancer, and birth
defects or other reproductive harm. Wash
hands after handling. (California Health
& Safety Code § 25249.5, et seq.)

Service Safety

1. Product service must be performed
only by a qualified technician.
2. When servicing a product, use only
identical replacement parts.
3. Maintain this product with care.
Keep this product clean. Do not use
a damaged product. Tag damaged
products "Do not use" until repaired.
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the system.
Never remove the grounding prong from the plug. Do not use the system if the power cord or
plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Figure A: Outlets for 2-Prong Plug
Item 62284
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
6. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
4. Disconnect the AC/DC Power Adapter
from the power source before making any
adjustments, changing accessories, or
storing this product. Such preventive safety
measures reduce the risk of electric shock.
5. Maintain labels and nameplates on
the unit. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
1. The included adapter does
not require grounding.
2. The adapter may be used in either
of the 120 volt outlets shown in the
preceding illustration. (See Figure A.)
Page 3