Network Settings - Nokia C5–00 User Manual

Show call duration — Display the length
of a call during the call.
Summary after call — Display the length
of a call after the call.
Speed dialling — Activate speed dialling.
Anykey answer — Activate anykey
answer.
Line in use — This setting (network
service) is shown only if the SIM card
supports two subscriber numbers, that is,
two phone lines. Select which phone line
you want to use for making calls and
sending text messages. Calls on both lines
can be answered irrespective of the
selected line. If you select
not subscribed to this network service,
you are not able to make calls. When line
2 is selected, is displayed in the home
screen.
Line change — Prevent line selection
(network service), if supported by your
SIM card. To change this setting, you need
the PIN2 code.

Network settings

Select Settings
>
Phone > Network.
To select the network mode, select
Network mode and
or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting UMTS
transfer, but may increase the demand on
battery power and reduce the battery life.
In regions close to both GSM and UMTS
networks, selecting
cause constant jumping between the two
© 2010 Nokia. All rights reserved.
Line 2 and have
Settings and
>
Dual mode, UMTS,
enables faster data
Dual mode may
networks, which also increases the
demand on battery power.
To select the operator, select
selection and Manual
available networks, or
the device to select the network
automatically.
To set the device to indicate when it is
used in a microcellular network (MCN),
select Cell info display
Telephone 29
Operator
to select from
Automatic to set
> On.