Kenmore 116.30412 Owner's Manual page 9

The attached
hose swivels to
make cleaning
easier in every
direction.
Remove the
hose from the
hose clip by
pulling
straight out.
Swivel
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
i Remove the
_l__l Crevice
telescoping
Tool
wand from
its storage
Telesceplng
position.
Wand
Remove the crevice tool from its storage
position in the wand, Turn the locking ring to
the UNLOCK position.
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach
the extension wand onto the open end of
the hose.
Suc tion
Wand _ _ Control Sfide
Upper
Wand
Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach
with the attachments, Hose
add the crevice tool to
the end of the auk.rio.
wand by inserting ur._=ml
and twisting slightly, sil_e
The dusting
brush or the
combination
brush may be
attached
directly to the
wand or
placed on the
end of the crevice tool,
TO OPERATE SUCTION
CONTROL SLIDE
Telescoping Wand
When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This will reduce suction
for ease of \ s,Jctten
_onrrol
The slide is S,'ld_
located on the
telescoping wand,
close to the hose.
NOTE: Return suction control slide to the
closed position for normal cleaning.
j CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over.
Make sure the carpet/bare floor selec-
tor is in the bare floor position.
Damage to the floor surface may
occur if the carpet setting is used.