Sony DVP-NS400D Service Manual page 12

QQ
3 7 63 1515 0
CD/DVD player
DIGITAL OUT LINE OUT
PCM/DTS/
DOLBY DIGITAL R-AUDIO 1-L
COAXIAL OPTICAL
R-AUDIO 2-L
B-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Coaxial digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Center Subwoofer
l: Signal flow
z
To enhance the surround sound effects:
• Use high-performance speakers.
• Use front, rear, and center speakers having the same size and performance.
• Place a subwoofer between the right and left front speakers.
• Refer to the operating instructions of the AV receiver (amplifier) for correct speaker setting location.
TE
L 13942296513
22
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
D
Logic) decoder and 3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or
DTS decoder, refer to page 21.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your amplifier (receiver).
•Dolby Surround (Pro Logic) (page 79)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
CD/DVD player
DIGITAL OUT LINE OUT
PCM/DTS/
DOLBY DIGITAL R-AUDIO 1-L
COAXIAL OPTICAL
R-AUDIO 2-L
D-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
www
to coaxial or optical digital input
[Speakers]
Rear Rear
.
(L) (R)
Subwoofer
l: Signal flow
∗ When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer.
24
http://www.xiaoyu163.com
5.1CH OUTPUT
S VIDEO COMPONENT
VIDEO OUT
OUT
Y FRONT REAR CENTER
L
VIDEO 1
P
1 B
P
2 R
R WOOFER
VIDEO 2
5.1CH OUTPUT
FRONT
Stereo audio cord
(not supplied)
or or
Monoural audio cord
(not supplied)
to audio input
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
Front (L)
. If your amplifier
D-1
.
D-2
S VIDEO COMPONENT
5.1CH OUTPUT
OUT VIDEO OUT
Y
FRONT REAR CENTER
VIDEO 1 L
P
1 B
2 P
R
WOOFER
VIDEO 2 R
Stereo audio cord
(not supplied)
(white)
Coaxial digital cord
(not supplied)
(red)
or or
(white) (red)
to audio input
x ao
y
Dolby Surround amplifier (receiver)
i
Rear*
Center
(mono)
http://www.xiaoyu163.com
8
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
C
an MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
amplifier (receiver) has a digital input jack, use
deck, use C-2 . In this case, you can also connect the player directly to the MD deck or DAT
B-1
deck with using your stereo amplifier (receiver).
xRecommended surround sound effects for the
•TVS STANDARD (page 50)
REAR CENTER
L
z
C-1
In connection
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
WOOFER
R
CD/DVD player
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
C-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Front (R) to coaxial or optical digital input
[Speakers]
Rear Rear
(L) (R)
Front
(L)
Front
(R)
l: Signal flow
Q Q
3 6 7 1 3
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver) the menu setting for the
player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of base adjustments use the player. To skip
an adjustment, press >. To return to the previous adjustment, press ..
D-1
POWER
LINE OUT
R-AUDIO 1-L VIDEO 1
1 Turn on the TV.
2 Switch the input selector on the TV to the player.
R-AUDIO 2-L VIDEO 2
3 Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message
does not appear, select "QUICK" under "SETUP" in the Control Menu to run Quick Setup (page
65).
4 Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
[Speakers]
u163
Front Front
(L) (R)
.
1-5
2 9 9 4 2 8
. When connecting to an MD deck or a DAT
C-2
C-1 connection only.
, you can use the supplied audio/video cord instead of using a separate audio cord.
LINE OUT
S VIDEO COMPONENT 5.1CH OUTPUT
OUT VIDEO OUT
Y
FRONT REAR CENTER
R-AUDIO 1-L VIDEO 1 L
1 P
B
2 P
R
R WOOFER
R-AUDIO 2-L VIDEO 2
Stereo audio cord
(not supplied)
(white)
Coaxial digital
cord (not supplied)
(red)
or or
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
1 5 0 5 8 2 9 9 4
1 2
ENTER
4 5
7 8
0
./> X/x
m
co
LANGUAGE SETUP
OSD: ENGLISH
ENGLISH
DVD MENU:
FRENCH
AUDIO:
SPANISH
SUBTITLE:
PORTUGUESE
9 9
. If the
C-1
C-1
LINE OUT
R-AUDIO 1-L VIDEO 1
R-AUDIO 2-L VIDEO 2
2 8 9 9
continued
23
[/1
3
6
9
./>
X/x
ENTER
continued
25