Sony DVP-NS400D Service Manual page 11

QQ
3 7 63 1515 0
A
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. Yo u will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 20).
B
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). Yo u will enjoy standard quality images.
C
If you are connecting to a monitor, projector or, AV amplifier (receiver) having
component video input jacks (Y, P , P
B
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord
(not supplied) or three video cords (not supplied) of the same kind and length. Yo u will enjoy
accurate color reproduction and high quality images.
Note
Do not connect the player to a VCR so that the signals of the player are passed to the TV via the VCR. If you do so, you may
not receive a clear image on the TV screen.
CD/DVD player
TE
L 13942296513
18
Connecting to your TV
A
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection.
•TVS DYNAMIC (page 50)
•TVS WIDE (page 50)
CD/DVD player
LINE OUT
DIGITAL OUT S VIDEO COMPONENT
VIDEO OUT
OUT
Y
PCM/DTS/
DOLBY DIGITAL
R-AUDIO 1-L VIDEO 1
P B
1
COAXIAL OPTICAL
P
2 R
R-AUDIO 2-L VIDEO 2
A
LINE OUT (yellow)
(white)
R-AUDIO 1-L VIDEO 1
(red)
R-AUDIO 2-L VIDEO 2
l : Signal flow
The yellow plug is used for video signals (page 17).
www
.
20
http://www.xiaoyu163.com
Ye llow (Video)
White (L)
Red (R)
)
R
VCR
TV
Connect directly
5.1CH OUTPUT
FRONT REAR CENTER
L
WOOFER
R
(yellow)
TV
(white)
(red)
Audio/video cord
(supplied)
to audio input
x ao
y
i
http://www.xiaoyu163.com
8
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection Components to be connected
• TV (stereo)
(page 20)
A
• AV amplifier (receiver) having 5.1ch input jacks
(page 21)
B
• 4 speakers
(front L and R, rear L and R)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
• AV amplifier (receiver) having a Dolby
(page 21)
B
input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
• Stereo amplifier (receiver)
(page 23)
C
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
• MD deck/DAT deck
(page 23)
C
• AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(page 24)
D
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofe r)
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** "DTS" is a registered trademark of Digital Theater Systems, Inc.
Q Q
3 6 7 1 3
Connecting to an AV amplifier (having 5.1ch input jacks or a digital input
B
jack) and 4 to 6 speak ers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital or DTS decorder function on your AV amplifier (receiver),
connect to its digital jack using
B-2
realistic audio presence in the comfort of your own home.
: Connecting to the 5.1ch input jacks
B-1
You can enjoy 5.1ch surround sound using the internal Dolby Digital decoder of this player. You
can also enjoy Dolby Surround (Pro Logic) sounds, or surround sounds using various
SURROUND modes (page 50).
xRecommended surround sound effects for this connection.
When 6 speakers are connected.
•Dolby Digital (5.1ch) (page 79)
(Set "SURROUND" to "OFF.")
: Connecting to the digital input jack
B-2
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). Yo u are not able to enjoy the SURROUND sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver).
•Dolby Digital (5.1ch) (page 79)
•DTS (5.1ch) (page 79)
Note
After you have completed the connection, be sure to set "DOLBY DIGITA L" to "DOLBY DIGITA L" (page 27). If
your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 27). Otherwise, no sound or a loud noise
will come from the speakers.
u163
.
1-4
2 9 9 4 2 8
through .
A D
* **
Digital or DTS decoder and a digital
1 5 0 5 8 2 9 9 4
continued
.
B-1
. With the following connections, you can enjoy a more
m
co
continued
9 9
2 8 9 9
19
21