Kenmore 795.75002.402 Service Manual page 23

8-1-8 Defect Diagnosis Function
1. Automatic diagnosis makes servicing the refrigerator easy .
2. When a defect occurs, the buttons will not operate; but the tones. such as ding. will sound.
3. When defect is repaired the defect code is removed and regfrigerator returns to normal operation (RESET)
4. The Defect code is shown on the display.
Defect code signs/
Signe code panne
ERROR CODE on display panel
NO ITEM
Failure of freezer
1
sensor
Failure of
2
Refrigerator sensor
Failure of defrost
3
sensor
4 Poor of defrost
ERROR CODE
All off
All off
All off
All off
Defect code signs/
Signe code panne
CONTENTS
Cut or short circuit wire
Cut or short circuit wire
Cut or short circuit wire
2hours later After
starting defrost, If
sensor doesn' t be over
46°F (8°C)
- 23 -
REMARKS
Inspect Connecting
wires on each sensor
Snapping of defrost
heater or T emperature
fuse, pull-out of
Connector (indicated
minimum 2 Hours
after failure occurs)