Editing Images; Using Image Filters; Adding A Title To An Image - Casio QV-770 Owner's Manual

To turn the screen saver on and off
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
3.
Use [+] and [–] to select
VIEW, and then press the
shutter button.
4.
Use [+] and [–] to select SCREEN SAVER, and
then press the shutter button.
6.
Use [+] and [–] to select the type of filter you
want, and then press the shutter button to
store the filtered image.
• Each press of [+] and [–] cycles through one of the five
available filters.
• Applying a filter does not affect the original image. In-
stead, the filtered version is saved as a new image
immediately after the original image. All images fol-
lowing the original image are automatically shifted to
make room.
• The amount of time it takes the camera to apply a filter
depends on the composition of the original image and
the type of filter you select.
PLAYBACK
5.
Use [+] and [–] to select ON, and then press the
shutter button.
• To turn off the screen saver, perform the above proce-
dure and select OFF in step 5.
• The screen saver activates if you do not perform any
operation for about five minutes in the Playback
Mode.
• To stop an ongoing screen saver operation, press the
shutter button.
• When changing between images, the screen saver
uses the interval that is specified for Auto Play (page
40). To change the interval, press MENU while a
screen saver operation is in progress, and then
specify the interval time you want.

EDITING IMAGES

Adding a Title to an Image

Adding a title to an image is actually a two-step process.
First you record the title into title memory, and then you su-
perimpose the title onto the image. Because of this, you
should prepare the title by printing it out on your computer or
handwriting it on a sheet of paper.
MATTERHORN
Recording the Title
IMPORTANT!
There is space for only one title in title memory. Any title
already in memory is automatically deleted whenever
you record a new title.
1.
Slide the Function Switch to REC.
EDITING IMAGES
EDITING IMAGES
A selection of powerful built-in editing tools helps you to cre-
ate the effects you want.

Using Image Filters

Use the following operation to apply black-and-white, sepia,
or another filter to an image. Filters alter the appearance of
an image and create interesting effects.
IMPORTANT!
A filter cannot be applied when any of the following con-
ditions are present.
• When an (Fine) resolution image is on the monitor
screen and there is only enough memory remaining to
allow recording of an (Normal) or
lution image
• When an (Normal) resolution image is on the moni-
tor screen and there is only enough memory remain-
ing to allow recording of an (Economy) resolution im-
age
• While a movie image or panorama image is on the
monitor screen
• When the "MEMORY FULL" message is on the moni-
tor screen
• Applying a filter to a rotated image, automatically
causes the image to return to its normal (unrotated)
orientation.
41 42
EDITING IMAGES
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Title Record Mode.
3.
On the monitor screen, compose the title that
you prepared.
• When recording a title, make sure that the title is be-
tween the lines provided.
• You can use [+] and [–] to adjust the exposure of the
title image. See "Exposure Adjustment" on page 25 for
details.
4.
Press the shutter button.
5.
Use [+] and [–] to adjust the brightness of the
±
title image ( 30), and then press the shutter
button.
• The brightness adjustment you make here is stored
along with the title image data.
43 44
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to display the image to which
you want to apply the filter.
3.
Press MENU.
4.
Use [+] and [–] to select
EFFECT, and then press
(Economy) reso- the shutter button.
5.
Use [+] and [–] to select
FILTER, and then press
the shutter button.
Title Recording Mode
Superimposing a Title onto an Image
IMPORTANT!
Text cannot be added to an images when any of the
following conditions are present.
• When an (Fine) resolution image is on the monitor
screen and there is only enough memory remaining to
allow recording of an
lution image
• When an (Normal) resolution image is on the moni-
tor screen and there is only enough memory remain-
ing to allow recording of an
age
• While a movie image or panorama image is on the
monitor screen
• When the "MEMORY FULL" message is on the moni-
tor screen
• Adding a title to a rotated image, automatically causes
the image to return to its normal (unrotated) orienta-
tion.
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to display the image onto which
you want to superimpose the title.
(Normal) or (Economy) reso-
(Economy)resolution im-