Connecting The Charger (If Included); Setting Up The Handset For Use - Gigaset A400 User Manual

Connecting the charger (if included)

To disconnect the plug from the charger, press the release button
and disconnect the plug 4.
3

Setting up the handset for use

Inserting the batteries and closing the battery cover
Only use rechargeable batteries (¢ page 12) recommended by Gigaset Communications
GmbH, i. e. never use a conventional (non-rechargeable) battery, as this could result in sig-
nificant health risks and personal injury. For example, the outer casing of the batteries
could be damaged or the batteries could explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤ Insert the batteries with the polarity
in the correct direction.
The polarity is indicated in/on the
battery compartment.
To reopen the battery cover, for instance to
replace the batteries, press the grooved
area at the top of the cover and slide it
downwards.
2
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
4
¤ Connect the flat plug from the mains adapter 1.
¤ Plug the power adapter into the plug socket 2.
¤ Slide the battery cover back into the main cas-
ing until it clicks into place.
4
3