Attaching Accessories; Attaching The Hood (Hdvf-El30 Only) - Sony HDVF-EL30 Operation Manual

5
Turn the PEAKING control to adjust edges in the
image.
To make edges in the image sharper: Turn the
control clockwise.
6
Set "CHROMA" in the FUNCTION menu (page 19)
to adjust the chroma level.
Note
Make sure the setting of "PRESET" in the PRESET menu
before performing the procedure above.
Depending on the setting, the BRIGHT and CONTRAST
controls may not be operated.

Attaching Accessories

Attaching the hood (HDVF-EL30
only)
1
Attach the hood inserting its claws in the left and
right grooves of the LCD monitor.
The hood can also be rotated up and down 180
degrees and attached.
By collapsing the hood while it is attached to the LCD
monitor, you can use it as the protection cover of the LCD
monitor.
Note
When you retract the LCD monitor with the hood
attached, rotate the LCD monitor to the opposite side by
180 degrees so that the hood faces up.
When you retract the LCD monitor forcibly with the hood
attached, it may cause a malfunction or damage.
Hood
11
Attaching Accessories