Programming Voice Dial Tags; Reviewing Voice Dial Tags - Sanyo KATANA DLX User Manual

Programming Voice Dial Tags

To program a voice dial tag:
1. Select a Contacts entry to which you would like to add a
voice dial tag and press
Entries" on page 102.)
2. Select a phone number, and then press Options (right
softkey) > Set Voice Tag > Add.
3. After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone's microphone.
4. Respond to the prompt by repeating the name after the
beep. (The display shows "Voice Tag Recorded.")
If you set a voice tag, the
phone number on the Contacts list.
Record voice dial tags in a quiet environment.
Tip

Reviewing Voice Dial Tags

To review voice dial tags:
1. Select a Contacts entry for which you would like to
review the voice dial tag and press
2. Select the phone number to which you have added a
voice dial tag, and select Options (right softkey) >
Set Voice Tag.
3. Select an option and press
Play to play the selected voice dial tag.
Play:Speaker to play the tag in speakerphone mode.
Section 1H: Using Your Phone's Voice Services
. (See "Finding Contacts
icon is shown next to the
.
.
134