Programming Voice Dial Tags; Reviewing Voice Dial Tags - Sanyo S1 Sprint User Manual

Programming Voice Dial Tags

To program a voice dial tag:
1.
Press
2.
You will be prompted to say the name you want to
program. Say the name after the beep.
3.
Respond to the prompt by repeating the name after the
beep.
4.
Select the voice dial entry (name) in the Contacts list and
press
5.
Select your desired phone number and press
display shows "Voice Tag Recorded.")
Tip: Record voice dial tags in a quiet environment.

Reviewing Voice Dial Tags

To review voice dial tags:
1.
Press
2.
Select Review or Rev.:Speaker.
3.
Select the desired entry and press Options (right softkey).
Then highlight your desired option and press
Play to play the recorded voice dial tag.
Speaker on to play the recorded voice dial tag in
speakerphone mode. (If you are in speakerpone
mode, the option will appear as Speaker Off to
deactivate the speakerphone mode.)
Erase to erase the recorded voice dial tag. Select Yes
to erase; select No to cancel.
Tip: To erase all voice dial tags you have recorded, see " Erasing
Phone Content"on page 77.
Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Voice Tag > Program.
.
> Tools > Voice Services > Voice Tag.
. (The
.
119