Sony RDR-GX380 Operating Instructions Manual page 75

The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO's menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when "
does not appear on the TV screen (page 46).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO's
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks, JPEG image files, DivX
video files do not play.
, The MP3 audio tracks, JPEG image files, DivX
video files are not recorded in a format that the
recorder can play (page 79).
Recording/Timer recording/
Editing
The channel cannot be changed from the
channel you are recording.
, Set the TV's input source to "TV."
Recording does not start immediately after you
press z REC.
, Operate the recorder only after "REAd"
disappears from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder's internal clock stopped due to a
power failure. Reset the clock (page 65).
, The channel was disabled after the timer
recording was set. See "Channel and Clock
Settings (General)" on page 65.
, Disconnect the mains lead (the power cord) from
the AC outlet, and connect it again.
, The program contains copy protection signals
that restrict copying.
, Another timer setting overlapped the timer
setting (page 39).
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The disc is protected (DVD-RW (VR mode))
(page 34).
, The recorder was in the process of DV Dubbing
(page 61).
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
"
On-screen instructions may appear after pressing
x REC STOP. In the case, follow the on screen
instructions.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure before or during
recording. Reset the clock (page 65).
, Another timer setting overlapped the timer
setting (page 39).
, Disc space was not sufficient.
Contents previously recorded were erased.
, Data that is not playable on this recorder but was
recorded on a DVD with a PC will be erased
from the disc when the disc is inserted.
Display
The clock has stopped.
, Set the clock again (page 65).
, The clock stopped due to a power failure. Reset
the clock (page 65).
The " " indicator is flashing.
, The disc does not have enough space.
, Insert a recordable disc into the recorder.
The recording mode indication is incorrect.
, When the recording or dubbing is less than three
minutes, the recording mode indication may be
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
,continued 75