Sony RDR-GX380 Operating Instructions Manual page 23

VCR
• To watch the connected VCR or similar device's pictures through the recorder while the recorder is in standby mode,
set [Power Save] to [Off] (default) in the [General] setup (page 66).
• If you disconnect the recorder's mains lead (the power cord), you will not be able to view the signals from the
connected VCR.
Connecting to the LINE 2 IN jacks
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder.
: Signal flow
z Hint
When the connected equipment outputs only monaural sound, use audio cords that distribute monaural sounds to left/
right channels (not supplied).
b
Notes
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. This may cause noise (feedback).
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
DVD recorder
VCR, etc.
OUTPUT
VIDEO AUDIO
L R
Audio/video cord
(not supplied)
Line input 1
TV
Line input 2
to LINE 2 IN
DVD recorder
23