Sony RDR-GX380 Operating Instructions Manual page 63

9
Select [DV Input], and press ,.
Disc Record Mode
DV Input
Auto Chapter
[Stereo 1] (default): Records original sound
only. Normally select this when dubbing a DV
format tape.
[Stereo 2]: Records additional audio only.
Select this only if you have added a second
audio channel when recording with your
digital video camera.
10
Select an option, and press ENTER.
11
Press O RETURN to turn off the Setup
Display.
12
Press PLAY to start playing the DV/
H
Digital8 format tape.
The playback picture appears on the screen.
13
While watching the screen, search for the
point you want to start recording by
pressing m/M.
14
When you find the point you want, press X
PAUSE.
15
Press z REC.
Playback starts from the selected point, and
the recorder starts recording.
To stop recording
Press REC STOP. Note that it may take a few
x
seconds for the recorder to stop recording.
b
• If you want to play the disc on other DVD equipment,
• You cannot connect more than one piece of digital
Stereo 1
Stereo 2
• You cannot control the recorder using another device
• You cannot record date, time, or the contents of the
• When dubbing from a DV/Digital8 format tape by way
• If you dub a DV/Digital8 format tape that has been
• If you record from a DV/Digital8 format tape with a
• The recorded picture may be momentarily affected if
• Noise may occur when you switch the audio sampling
• The video or sound may drop out during the recording
• If there is a blank space for one second or more on the
Notes
finalize the disc (page 34).
video equipment to the recorder.
or another recorder of the same model.
cassette memory onto the disc.
of the DV IN jack, the recorder starts recording about
five seconds after the tape starts playing.
edited on a PC using the DV IN jack, any audio
recorded on the Stereo 2 track may only be recorded as
noise.
sound track that is recorded in multiple sampling
frequencies (48 kHz, 44.1 kHz, or 32 kHz), no sound or
an unnatural sound will be output when playing back
the sampling frequency switch point on the disc.
the picture size of the source image changes, or if there
is nothing recorded on the tape.
mode (e.g.48 kHz/16 bits t 32 kHz/12 bits).
of start/stop points on the tape.
tape, DV dubbing ends automatically.
63