JVC KD-AR390 Instructions Manual page 30

This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
This unit can only display letters (upper case), numbers,
and alimited number of symbols.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at atime.
While connecting adevice, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select "OPEN" on the unit to connect
the device. (See page 10.)
• Enter the same PIN code for both the unit and target
device.
• Select the device name from "SPEClAl," then try to
connect again. (See page 11.)
• Try to pair/connect from the Bluetooth device.
Adjust the microphone unit position.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to aplace where you can get abetter
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio device.
• Disconnect the device connected for "BT-PHONE."
• Turn off, then turn on the unit.
• (When the sound is not
yet
restored,) connect the
device again.
Check whether the connected audio device supports
AVRCP (Audio Video Remote Control Profile).
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
30