Battery Installation & Charging - AT&T E2116 User Manual

Getting Started
Battery installation & charging
After battery installation, place the cordless handset in the base and allow to charge for
at least 16 hours before use. You can keep the battery charged by returning the cordless
handset to the base after each use. When the battery is fully depleted, a recharge takes
about 16 hours. The talk time on a fully charged battery is about four hours depending on
environmental conditions, and the standby time is approximately five days. Actual battery
life will depend on usage conditions, and age of battery.
Press down on tab
to open the battery
door.
MUTE CHAN REDIAL
BATTERY LOW
0 8/12 10:06
Low battery indicator.
Return cordless handset to
base to recharge when this
symbol flashes. (When in
use the cordless handset
will beep when battery
is low).
Plug the battery pack
connector securely
into the plug inside
the cordless handset
battery compartment,
matching the color-
coded label. Then
place battery pack
into compartment.
Caution: Use only the supplied
rechargeable battery or AT&T replace-
ment battery model 3301 (SKU 91076,
Part number 80-5071-00-00).
Place cordless handset in base
to charge for at least 16 hours
before first use.
7
AM
Slide the battery
door up to close.