Needle Threader; Threading For Twin Needle - Pfaff ambition 1.0 Owner's Manual

Needle threader

The needle threader allows you to thread the needle
automatically. The needle must be in its highest
position to use the built-in needle threader. Press the
needle up/down button to make sure the needle is
fully raised.
We also recommend lowering the presser foot.
1. Use the handle to pull the needle threader all the
the needle eye.
3. Let the needle threader gently swing back. The
hook pulls the thread through the needle eye and
forms a loop behind the needle. Pull the thread
loop out behind the needle.
Note: The needle threader is designed to be used for size
70-120 needles. You cannot use the needle threader for size
60 needles or smaller, wing needles or twin needles. There
are also some optional accessories that require manual
threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back.

Threading for twin needle

Replace the sewing needle with a twin needle. Make
sure that the presser foot is raised and the needle is in
its highest position.
appropriately sized spool cap. Insert the auxiliary
pad. Place the second thread on the spool pin.
back to front. Pull both threads between the
3. Thread down through the right-hand threading
slot and then upwards through the left-hand
threading slot.
4. Bring the threads from the right into the take-up
Place one thread into the slot on the left side of
into the slot on the right side of the needle thread
become twisted together.
5. Thread the needles.
Note: The weight and irregular surface of specialty threads
such as metallic increases the amount of friction on the
thread. By reducing the tension, the risk of needle breakage
is prevented.
16
F
A
C B
E
G
D
F