Table of Contents
Advertisement
AGING MODE
This set has the Aging mode for operation check of the mechanism deck.
• If a failure occurred
The aging operation stops and a faulty status is displayed on the fluorescent display tube.
• If no failure occurs
The aging operation continues repeatedly.
Note: To enter the Aging mode, the Aging Remote Commander (J-2501-123-A) is required.
1. Press
button to turn the power ON.
!
2. Set a disc on the tray.
[AGING START]
3. Press
button on the Aging Remote Commander.
4. The aging starts, and the fluorescent display tube will display the following.
5. At the completion of aging, press
Code No.
Status
0
Load IN
1
Access to TOC
2
Access to last track
3
Play of last track (3sec)
4
Access to first track
5
Play of first track (3sec)
6
Load OUT
12
button.
!
Display in
normal operation
A-0
A-1
A-2
Counter display
A-4
Counter display
A-6
Display in
case of failure
Err-0
Err-1
Err-2
Err-3
Err-4
Err-5
Err-6
Hide quick links:
Advertisement
Table of Contents
