Samsung NC241 User Manual page 60

2
Using "PCoIP"
Alignment

Select how you want displays A and B aligned when they are different sizes.
This setting affects which area of the screen to use when you move the cursor from one display to
the other. The alignment options that appear in the drop-down list depend on whether you have
selected a horizontal or vertical display layout.
Primary

Configure which DVI port on the zero client that you want as the primary port.
The display that is connected to the primary port becomes the primary display (i.e., the display that
contains the OSD menus before you initiate a PCoIP session and the display that is requested for
the Windows taskbar after you initiate the session).
Port 1: Select to configure DVI-1 port on the zero client as the primary port.

Port 2: Select to configure DVI-2 port on the zero client as the primary port.

Position

Specify which display is physically connected to
Rotation

Configure the rotation of the display in
No rotation

90˚ clockwise

180˚ rotation

90˚ counter-clockwise

Resolution

The display resolution can be configured for a PCoIP session between a virtual machine or host and
a zero client. The zero client detects the supported display resolutions of the monitor and populates
them to the drop-down menu. By default, the native resolution of the display is used.
Revert

Resets the configurations on this page to their last saved settings.
Port 1 and Port
Port 1 and Port 2:
2.
2 Using "PCoIP"
60