Sony RCD-W10 Service Manual page 24

RCD-W10
1-3. Setting of Programs (Tera Term Pro and Service macro)
* Confirmation of System (Windows 98 is used in this explanation) Preparation for Terminal software
1) Set up the serial port from OS.
Select Start → Settings → Control Panel and select System →
a)
Device manager → Communication Port (COMn)
(see Fig. 1-1)
* Specify the COM port that connected with JIG of CDM65.
b) Double click COMn (as you connect to the Jig-CDM65)
Set the parameters as below.
Bits per second : 38400
Data bits : 8
Parity : non
Stop bits : 1
Flow control : hardware
(see Fig.1-2)
24
4 Fig. 1-1
4 Fig. 1-2