Panasonic SC-TM72DV Service Manual page 3

}
16.1 Recovery after the dvd player is repaired
16.2 DVD Player Firmware Version Upgrade Process
16.3 Firmware Version Upgrade Process by Using Disc and Recovery Process
16.3.1 Self-Diagnosis Function
16.4 Using Recovery Disc
16.4.1 Recovery Process
16.4.2 Version Upgrade Process
16.5 Total Usage Time Display
16.6 After replacement of DVD Module
17 Disassembly and Assembly of Main Component
17.1 Disassembly flow chart
17.2 Disassembly of Top Cabinet
17.3 Disassembly for DVD changer unit
17.3.1 Disassembly of the DVD Module P.C.B.
17.4 Disassembly for Panel P.C.B., MIC P.C.B. & Tact Switch P.C.B.
17.4.1 Disassembly of Lid
17.5 Disassembly of Main P.C.B., Power P.C.B., , Power Amp P.C.B., Power Supply P.C.B., Transformer P.C.B. & Voltage
Selector P.C.B.
17.5.1 Disassembly of Power Amp P.C.B.
17.5.2 Disassembly of Power P.C.B.
17.5.3 Disassembly of Power Supply P.C.B.
17.5.4 Disassembly of Transformer P.C.B. & Voltage Selector P.C.B.
17.6 Replacement for traverse deck
17.7 Replacement for optical pickup unit (DVD mechanism)
17.8 Procedure for removing CD loading mechanism
17.9 CR16 mechanism disassembly procedure
17.9.1 Gear for servicing information
17.9.2 Replacement for the disc tray
17.9.3 Replacement for the traverse deck
17.9.4 Disassembly for CD loading unit
17.10 CR16 MECHANISM ASSEMBLY PROCEDURE
17.11 Disassembly for Traverse Unit
17.12 Disassembly of Deck Mechanism Unit
17.12.1 Replacement for the CD motor ass ' y, capstan belt A, capstan belt B and winding belt
17.13 Replacement for the cassette lid ass ' y
17.14 Counter-measure for tape trouble
18 Service Position
18.1 Checking Procedure
18.2 Checking the Main P.C.B., Power P.C.B., Power Supply P.C.B., Power Amp P.C.B., Transformer P.C.B., Voltage
Selector P.C.B. and AC Inlet P.C.B.
18.3 Checking the Panel P.C.B., Tact Switch P.C.B., Mic P.C.B., Deck P.C.B. & Deck Mechanism P.C.B.
19 Measurements and Adjustments
19.1 Cassette Deck Section
19.1.1 Head Azimuth Adjustment (Deck 1 / 2)
19.1.2 Tape Speed Adjustment (Deck 1 / 2)
19.1.3 Bias and Erase Voltage Check
19.1.4 Bias Frequency Adjustment (Deck 1 / 2)
19.2 Tuner Section
19.2.1 AM-IF Alignment
19.2.2 AM RF Adjustment
19.3 Alignment Points