Battery Storage; On The Move With The Notebook - Fujitsu Siemens Computers LITELINE Series Operating Manual

Important notes
For units set at 115 V
Use a parallel blade attachment plug rated 15 A,
125 V.
For units set at 230 V (outside of the United States and Canada)
Use a cord set consisting of a minimum AWG according to Table A and an attachment plug rated 15
A, 250 V. The cord set should have the appropriate safety approvals for the country in which the
equipment will be installed and should be marked HAR.

Battery storage

If you do not use the batteries for long periods, remove them from the notebook. Never
i
store the batteries in the unit.

On the move with the notebook

Please observe the points listed below when transporting your notebook.
Transporting the notebook
•
Do not pick up the notebook by the open monitor.
•
Switch off the notebook.
•
Remove all data carriers (e.g. floppy disk, CD) from the drives.
•
If it needs to be shipped, use the original packaging or other suitable packaging to protect it
from damage caused by mishandling.
•
Protect the notebook from severe shocks and extreme temperatures (e.g., direct sunlight in a
car).
Before starting the journey
•
Copy important data from the hard disk onto a floppy disk.
•
Remove all data carriers (e.g. floppy disk, CD) from the drives.
•
If you wish to use your notebook during a flight, check first with the flight attendants if it is
permissible to do so.
•
If you are travelling abroad, ensure that the power adapter can be operated on the local line
voltage. If this is not the case, obtain the appropriate power adapter for your notebook.
Do not use any other voltage converter!
12
Battery storage
A26391-K96-Z100-2-7619