8 Service Mode
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
8.1.
Self Diagnostic Mode
Here is the procedures to enter into Self Diagnostic Mode.
Step 1 : Turn on the unit.
Step 2 : Select CD mode.
Step 3 : Press and hold [ ] button for 2 seconds follow by [
Step 4 : The display show as follow.
To exit the Self Diagnostic Mode
Use either one of the following methods to cancel the Self Diagnostic Mode.
• Press the power button on the main unit or using the remote control.
• Unplug the AC cord.
8.1.1.
Self Diagnostic Table
Mode name
Self Diagnostic Mode
To enter into self diagnostic
checking
Error code information
System will perform a check on
any unusual/error code from the
memory
Delete Error code
To clear the stored in memory
(EEPROM IC)
Item
Description
] on the unit.
FL display
Example:
17
Key operation
Step 1 : Select CD mode
(Ensure no disc is inserted).
Step 2 : Press and hold [
] follow by
[
] on main unit for 2
second .
Step 1 : In self diagnostic mode,
Press [STOP] on main unit.
To exit, press [TA] on main
unit or remote control.
Step 1 : In self diagnostic mode,
Press [0] on remote control.
To exit, press [TA] on main
unit or remote control.