Table of Contents
Advertisement
1. Open the Color Registration Utility:
On the Macintosh, in the Infoprint Color
8 program group, double-click Color
Registration Utility, then double-click
IBM Infoprint Color 8 Col Reg.
In Windows 95/98/NT 4.0, click Start ®
Programs ® IBM Infoprint Color 8 ®
Color Registration Utility.
2. Windows only: Make sure Infoprint
Color 8 on LPT1: is highlighted in the
box (if you are using a port other than
LPT1:, make sure that port is
highlighted).
3. Select the paper tray you want to
calibrate–you can set color registration
for each tray separately.
Setting the Color Registration
Using the Color Registration Utility
4. Click Print Color Calibration page.
The printer prints a color test page with 9
sections, each with a series of lined
boxes in it.
5. Beginning with section #1, find the box
where no color shows in the spaces
between the black lines. On the screen,
scroll to the number of that box in list box
#1 (yellow, left). Then, do the same thing
for sections 2 through 9.
66
Advertisement
Table of Contents
